EdmDrillTM CT500F

CT500F

Large Capacity EDM Drilling Machine

The EdmDrill™ CT500 is a high-precision, large capacity machine with 22 x 14 inch XY travel. The spacious work area can accommodate the Nikken 5AX105 or 5AX130 rotary table turning the CT500 into one of the most advanced CNC EDM drillers. The worktable material is granite to optimize electrical isolation and the unique work tank can be configured for submersed or non-submersed drilling. Any option can be added to the CT500, including the Automatic Electrode Changer (AEC24), Automatic Guide Changer (AGC) and safety light curtains. Built for accuracy, longevity and consistency, it’s easy to understand why hundreds of CT500 machines are being used in the most demanding production facilities worldwide.

AEC24 AUTOMATIC ELECTRODE CHANGER
Number of Drill Chucks 24
Electrode Diameter Range 0.012 in. – 0.118 in. (0.3mm – 3.0mm)
Collets/Sizes 12 each 0.020 in. (0.5mm)
12 each 0.040 in. (1.0mm)
Maximum Electrode Length 16 in. (400mm)
Compressed Air Required 70 – 90 PSI / Dry / 2.5 CFM
Emergency Drill Chuck 0.010 in. – 0.118 in (0.25mm – 3.0mm) range

SPECIFICATIONS

MACHINE CT500
X-Axis Travel
22.0 in. (559mm)
Y-Axis Travel
14.0 in. (356mm)
Z-Axis Travel
16.0 in. (406mm)
W-Axis Travel
10.5 in. (266mm)
Electrode Diameter Range
0.004 in. – 0.256 in. (0.1mm – 6.5mm)
Table Weight Capacity
682 lbs. (310kg) maximum
Machine Weight
2000 lbs. (909kg)
Machine Footprint
60 in. W x 71 in. L (1524mm W x 1803mm L)
Machine Footprint with AEC
68 in. W x 71 in. L (1727mm W x 1803mm L)
CONTROL
Controller
Siemens 840Dsl
Displayed Axes
X, Y, Z, W
Controlled Axes
X, Y, Z, W
Displayed Coordinates
Inch/Metric
Display Type
High-resolution LCD
Program Storage
3MB standard, expandable with USB flash drive
Table Feed Rate
Variable, up to 200 in./min (5000 mm/min)
Minimum Command Unit
0.0001 in.
Drilling Modes
Manual and Automatic
Manual Table Feed
Variable
Spindle Rotation
Bi-Directional
USB Port
Standard
Servo Feed Rate
Programmable
MOTORS AND DRIVERS
Motors (X, Y, W)
Siemens AC Servo
Feedback (X, Y, W)
Encoder
Z Motor
DC with Siemens Encoder
Positioning
±0.0005 in.
Repeatability
0.0002 in.
POWER SUPPLY
Type
Variable Frequency DC
Switching
High Current FET
Output Amperage
30/57 (mean/peak)
Amperage Range (Ip)
1 to 57 Amps (3 Amp increments)
On-Time Setting (TON)
1-100mSec (1mSec increments)
Off-Time Setting (TOFF)
1-100mSec (1mSec increments)
Meters
Voltmeter and Ammeter
Capacitance Range
0 to 1.15mFarad (0.05 increments)